AutoSeq setting of JTDX2020年12月16日 11時03分44秒

What number do you use for AutoSeq in JTDX?
I use 2, or 4+ (=6).
You may know that you can prioritize in the Notifications TAB, but if you set AutoSeq to 2 or higher, you can take advantage of it.
AutoSeq1 is the same as Call 1st in WSJT-X. It responds to the first decoded station.
In addition, JTDX has a function to prioritize LoTW users, so each item on the priority list has a different priority among them. (Well, from that point of view, there is an advantage in becoming a LoTW user)
If you have a computer with a too slow CPU, AutoSeq3 or 4+ (=7) may change the message to be sent after it is started to be sent, so be careful.
I think JTDX has some great features. I call CQ DX with 4+ (=6) when there is an open with multi-hop Es on the 6m band, and since it is CQ DX, I do not answer calls from stations within the same continent. Also, if there is no response to my CQ DX and there is a station outside the same continent that has a CQ, JTDX will automatically call that station. This is very efficient.
I'm sorry if my understanding is wrong.

My PC
Windows 10 Pro 20H2
CPU ntel(R) Core(TM) i9-9900K
MEM 32GB
JTDX setting as...
decoding cycles 3
decoder sensitivity "use subpass"

FB DX
de JP1LRT


コメント

コメントをどうぞ

※メールアドレスとURLの入力は必須ではありません。 入力されたメールアドレスは記事に反映されず、ブログの管理者のみが参照できます。

※なお、送られたコメントはブログの管理者が確認するまで公開されません。

※投稿には管理者が設定した質問に答える必要があります。

名前:
メールアドレス:
URL:
次の質問に答えてください:
管理者のコールサインは? 小文字で。My callsign? Small leter only.

コメント:

トラックバック

このエントリのトラックバックURL: http://jp1lrt.asablo.jp/blog/2020/12/16/9327362/tb

※なお、送られたトラックバックはブログの管理者が確認するまで公開されません。