RIGとVSPE2025年09月05日 15時24分05秒


IC-7300とVSPEというタイトルの記事を書きました。

VSPE の FAQには ICOM では という指定が書いてありました。


このページの下から2つ目の例です。



Data processing mode を Switch にしろと。


またFAQの一番下では YAESU / KENWOOD は Data processing mode を Smart router  にしろとあります。




ICOMは  Switch   、  Yaesu と Kenwood は Smart router をお試しください。

Smart routerを選択すると、Settingsからリグのリストを表示させて選択することができます。


WSJT-X 3.0.0-rc1 リリース2025年09月16日 06時52分45秒


タイトルの件リリースされています。



WSJT開発チームは、多くの新機能と能力を提供するメジャーリビジョンであるWSJT-X 3.0.0の準備を完了すべく尽力してきました。新機能の多くは既にWSJT-X Improved 2.8.0でテスト済みであり、同エディションのユーザーには馴染み深いものとなるでしょう。一方で、全く新規の機能も存在します。

変更点の完全な概要については、新しいリリースノート https://wsjt.sourceforge.io/Release_Notes.txt および WSJT-X ユーザーガイド https://wsjt.sourceforge.io/wsjtx-doc/wsjtx-main-3.0.0-rc1.html#NEW_FEATURES のセクション 1.1 を参照してください。


なおご理解いただいているとは思いますが、rc版は新機能を試して開発者にフィードバックを提供したいユーザー向けです。

WSJT-X 3.0.0-rc1 の新機能 New Features2025年09月19日 15時11分03秒

先日リリースされた WSJT-X 3.0.0-rc1 ですが、新機能があります。

JTDXに搭載されていた機能をほぼそのまま移植した感じです。

The recently released WSJT-X 3.0.0-rc1 includes new features.

It feels like they've ported over nearly all the features that were in JTDX.





ようやくCPUのマルチスレッドに対応しました。

デコード数はJTDXとほぼ同じです。

今までデコード能力だけで仕方なくJTDXを使用していた方、JTDXのrc版を不正使用している皆さん、いかがですか?  WSJT-X 3.0.0-rc1 をお試しになられては。

At last, it supports CPU multithreading.

The decoding rate is nearly identical to JTDX.

For those who've been forced to use JTDX solely for its decoding capability, and everyone using JTDX's rc version without authorization—how about it? Why not give WSJT-X 3.0.0-rc1 a try?

Thoughts on WSJT-X 3.0.0-rc12025年09月23日 10時53分21秒

My thoughts on WSJT-X 3.0.0-RC1. It seems to incorporate JTDX's features, evolved specifically for FT* decoding, with almost no modifications. This clearly reflects the JTDX development team's intent. I believe the JTDX development team decided not to release a GA version until the war ended, instead providing WSJT-X with JTDX's excellent features. This is purely my personal impression, and I don't know the truth, but it must have been a difficult choice.


Features like multithreaded CPU support and decoding settings are identical to JTDX.


WSJT-X enthusiasts will surely be surprised by the sudden, dramatic improvement in WSJT-X's decoding capabilities.



Parameter settings of WSJT-X 3.0.0-rc12025年09月30日 19時07分14秒

The enhanced decoding capabilities in WSJT-X 3.0.0-rc1 appear to stem from technology transfer from JTDX. While JTDX users are already aware of the optimal settings, I thought it would be helpful to share this information with WSJT-X enthusiasts who might not be familiar with them.



Please configure the section highlighted in red as shown here.


WSJT-X version 3.0.0-rc1 now supports multi-threaded CPUs, and it is generally recommended to set this option to "Auto."



For the decoding cycle, choose either option 2 or 3. If you have a high-performance CPU, option 3 should perform well. However, if your system is less powerful, selecting option 3 may lead to longer decoding times. I recommend experimenting with the settings on your computer to find the best option for your setup.




Make sure to adjust both of the above items to the settings indicated in the red frame. Keep in mind that using subpass may feel sluggish on less powerful CPUs..



The ideal setting can vary depending on CPU performance. Typically, "Normal" is a suitable choice, but it's a good idea to experiment to find the optimal configuration for your system.

By adjusting these parameters, you can achieve decoding capabilities that were previously unattainable with earlier versions of WSJT-X. Please test different settings to find the best configuration for your specific environment.